Wall vent TL80DE dBR IP

General
Wall vent  with a very discreet design.

The front can be wallpapered and painted over. The valve features robust condensation insulation, over-ventilation protection, storm protection, and a filter. The storm protection prevents energy loss due to wind impact. The flow is regulated by the front, which has a mechanism for adjusting the opening angle. The front opens at the top and directs air upwards, providing a comfortable airflow pattern even with underfloor heating. The wall vent is also available in several sound-reducing variants.

Sound-Reducing
The sound-absorbing wall duct consists of a sound-absorbing pipe instead of a standard wall pipe. The sound-absorbing pipe is easy to cut to the correct length with a utility knife. Standard pipe length is 400 mm with an outer diameter of 148 mm and inner diameters of 81 mm and 98 mm. The internal valve part features robust condensation insulation, a filter, and a front that tilts up at the top for flow adjustment. The filter is mounted in a cassette that also has protection against potential water ingress. The front has four opening positions to vary the flow. The airflow pattern is carefully designed to be compatible with underfloor heating systems, directing the air upwards and sideways. The mixing of room air is very efficient, with strongly cooled air reaching a comfortable temperature just a few decimeters from the unit.

Installation/Placement
The wall vent should be placed high on the wall, and if there is a radiator, it should ideally be placed above it. Such placement utilizes the convection current, achieving optimal comfort. The valve is perfectly suitable for use with underfloor heating as it is designed for this purpose.

Operation/Maintenance
To ensure good air quality and maintained flow, the filter should be cleaned or replaced 1-2 times per year. The standard filter is washable with a mild soap solution. Pollen and environmental filters should be replaced with new ones. The filter is mounted in a cassette behind the front, which can be easily removed by releasing the front from the lower mounts and then lifting it up. Pull the filter cassette straight out from the valve chassis.

Accessories
A complete range of accessories is available for the valve to provide additional flexibility.