DISCONTINUED - Wall vent TL 80F dBs

Wall vent with a very comfortable distribution pattern designed for underfloor heating When delivered as an assembly, the vent comes with a filter, sound-absorbent lead-through and exterior wall grille. The lead-through consists of a sound-absorbent pipe and an external grille with adapter. The sound-absorbent pipe can be easily cut to the right length using a standard knife. The standard pipe length is 360 mm. Internal vent part: The internal vent part has a condensation-protecting design, filter and a precision shutter for infinitely adjustable setting of flow. The shutter control is hidden under the cover. The distribution pattern has been carefully developed to suit underfloor heating systems. The vent releases the air upwards and to the sides. Mixture with room air is very effective. Very cooled air reaches a comfortable temperature just a few decimetres from the device. Installation/positioning: The vent should be positioned high up on the wall. If there is a radiator, it is best to try to position the vent above this. With this positioning, you utilise the convection flow and achieve the best comfort level. The vent works extremely well with underfloor heating and is designed for this. Operation/maintenance: To ensure good air quality and maintained flow, the filter should be cleaned/replaced 1–2 times/year. The standard filter can be washed in a mild soap solution. The pollen and environmental filters must be replaced. The filter is fitted behind the cover, which is easily removed by pulling it straight out from the vent chassis.